How to clean your Xbox Series X

a step-by-step method on cleaning an Xbox Series X to restore it to near-new condition

It’s time to retire indoors till springtime rolls around once again now that summer has come and gone. To make sure your Xbox Series X is in good working order before entering the hibernating season, take the time to clean it before curling up with a hot beverage and a blanket.

You’ll want your cherished console to be operating as effectively as the day you purchased it given the fantastic new Xbox Series X titles that are on the horizon. So, if you’re wondering how to thoroughly clean your Xbox Series X, start here.

The reality is that even how spotless and clear of dust we maintain our houses, early buildup may occur inside of and around electrically active gadgets. Over time, this may even result in noisier fans, overheated components, and even total system failure. So come along with us as we investigate how to clean an Xbox Series X, and never forget to first turn off the power to the device and set it down on a solid, firm surface.

Simple Xbox Series X maintenance

Quick steps:

• Be cautious to turn off the power before washing your Xbox Series X.
• Set your Xbox Series X down on a solid, flat surface.
• Use disinfectant wipes or a soft, lint-free cloth to gently clean the outside.
• Use a 70% or lower isopropyl alcohol (IPA) solution to clean your Xbox Series X.
• every three to six months

External Xbox Series X clean guide

According to Microsoft’s official advice, only exterior cleaning should be done for regular maintenance, and either a soft, lint-free cloth wet with a little quantity of mild soap and water, or pre-moistened disinfection wipes, should be used. It is also advised to repeat this every three to six months.

Microsoft suggests using isopropyl alcohol (IPA) solution at a 70% or lower concentration if you want to disinfect your console in addition to cleaning it.

Once again, be sure to totally unplug your console from the mains before using any cleaning supplies on it.

Read More: The Rise of the Next-Generation Monster GPU: 7 Facts About Nvidia GeForce RTX 40 Series

How to remove dust from your Xbox Series X

Is the noise level on your Xbox Series X higher than usual? That might be caused by a buildup of dust around the fan and in the vents. Both the loudness and the cleanliness of the console may be improved by removing this accumulation. Use a low-power vacuum cleaner or compressed air to carefully remove the dust accumulation after ensuring sure the console is off and removed from the power source.

Once your console is clean and dust-free, it’s important to think about where your Xbox is located and make sure there is enough of room around the system. According to Microsoft’s stated guidelines, we should keep the Xbox Series X away from heat sources, soft surfaces, and restricted spaces. Basically, your Xbox Series X needs the room to breathe.

Keeping your Xbox Series X clean

Quick steps:

• Be cautious to turn off the power before washing your Xbox Series X.
• Set your Xbox Series X down on a solid, flat surface.
• Remove the tiny cover and big sticker off the console’s back.
• To remove screws and take off the back plate, use a T8 screwdriver.
• To remove dust and filth, use compressed air and a microfiber cloth.
• Replace the screws and back plate.

Xbox Series X internal cleaning guide

Microsoft suggests that you only give your Xbox Series X an external clean in its official advice(opens in new tab). However, you may want to think about an Xbox Series X internal clean if you really want to go in there and make sure everything is in great condition. Now, it’s important to note that this shouldn’t violate your warranty (as long as you take care and don’t harm anything). However, if you’re not sure what you’re doing, a simple exterior clean will typically enough.

Fortunately, entering your Xbox Series X isn’t too difficult. You’ll need a T8 screwdriver before you begin; this is a specialized electronics screwdriver with a 6-pointed star tip, so you won’t find it in a standard toolbox.

Before trying an internal clean, ensure sure your console is switched off, unplugged from the power source, and set down on a spotless hard surface.

One of the screws may be seen by removing the huge sticker on the console’s back, while the other can be seen by removing the little black oval sticker beside the HDMI port.

Remove these screws using your T8 screwdriver, and be sure to store them safely afterward. When they are removed, you may take the console’s rear plate off.

The fan is located exactly at the top of the console, close to the collection of green holes, so you may now gently use compressed air to remove dust and grime accumulation. To carefully remove any obstinate particles that the compressed air doesn’t manage to dislodge, you may alternatively use a microfiber cloth.

Once everything is tidy, replace the back plate until you hear it click, insert those two screws using a T8 screwdriver, and reconnect the console to the mains. In no time, you’ll be prepared to pick up Halo Infinite or Forza Horizon 5 once again.

Official Xbox Device Service

You may ask Xbox to do a Device Service if your Xbox Series X overheats and shuts down despite the fact that it seems to be in good condition and has plenty of ventilation space (opens in new tab).

This could be a good choice for you if you don’t feel comfortable completely disassembling your console yourself to clean it, and who can blame you?

Read More: 5 Best Site to receive validation SMS With Virtual Numbers